Blood Hematocrit Centrifuge With High Speed Dm1224-cheer Instrument

DM1224 Hematocrit Centrifuge

• Max.speed is 12000rpm, max. RCF 13680×g
• Precise control of speed and time separately
• Rotor capacity: Hematocrit rotor: 24 capillary

• User-friendly large LCD display show all information

• RPM or G-force can be set and displayed

Product Advantage

01

Max speed 12000rpm, 13680xg

The maximum speed of 12000 rpm, RCF 13680 × g, is enough to meet the usual requirements of capillary centrifugation (10000g)
02

LCD display

• LCD display shows speed and running time, clear and intuitive;
03

Automatic lid-release function

Automatic release the lid when operation has stopped to save processing time

04

Explison proof and long service time
Low carbon and environmental protection

• Maintenance-free DC brushless motor, long service life, no hidden danger of sparks, ensuring laboratory safety;
05

Easy to read the result

• The configuration result is judged to read the disk, which is convenient for reading the result quickly;
06

Quick Spin function

Quick spins are possible by pressing and holding PULSE key. The centrifuge speed can be accelerated and held at the target speed.

SHCHEER economical hematocrit centrifuges are widely used in clinical medicine, biochemistry, immunology, etc., and are routine instruments used in the laboratory for centrifugal sedimentation. It is mainly used to measure the blood cell specific value, the separation of trace blood and trace solution in blood.

Specification

Specification	DM1224
Speed range	500-12000rpm in 100rpm increments.
Max. RCF	13680xg
Speed Accuracy	+/-100rpm
Rotor Capacity	Capillary tube*24
Run time	10sec ~ 99min or Continuous Running
Motor type	Brushless DC motor
Display	LCD
Safety Device	Door interlock
Plower	Single phase, 220V-240V, 50Hz/60Hz, 5A
Acceleration/ Braking time (Sec)	40s↑ 40s↓
Dimension (Depth* Width* Height)	290* 364* 213mm
Net Wight	10kg
Advanced feature	Speed/ RCF switch; Short-time run function; Sound alert function

How to calculate the Hct value by reading dial?

Step 1.

Rotate the dial so that the top edge of the yellow plasma layer aligns with the innermost circle of tick marks, which is the 100 mark.

Step 2.

Keep the reading plate still. Observe and find the circle of tick marks aligned with the top edge of the red blood cell deposit. In the above picture, there is a 10 circle between 40 and 50. The third circle starting from 40 is exactly aligned with the top of the red cell layer, so the Hct value is 43%.

Take anticoagulated whole blood or peripheral blood, fill 2/3 (50 mm) of disposable capillary tube (tube length 75 mm), seal, use DM1224 centrifuge to 12000 r/min (relative centrifugal force RCF ≥ 10000) g), centrifuge for 5 min, read the red blood cell layer and the full layer length with a dedicated reading plate or scale, and calculate the Hct value.

Simulated erythrocyte capillary

The blood sample in the capillary will stratify after centrifugation, likes the picture shows.

Characteristic

Optional Accessories

Angle Rotor AC24

Max. speed: 12000rpm
Max. RCF: 13680×g
Rotor capacity: capillary tubes x24
Rotor material: High strength aluminum

Name

Phone

Company

Address

Content

High Speed Centrifuge

Blood hematocrit centrifuge with high speed DM1224